Our Courses

IPAF Demonstrator

Working At HeightsHealth & Safety
POA

This course is aimed at personnel who are or will be responsible for using MEWPs (Trailer Mounted Booms, Scissorlifts, Cherry Pickers etc) in the work place. All delegates wishing to attend the IPAF Demonstrator training course must have successfully completed the IPAF Operator Course prior to attending and hold a valid IPAF PAL Operator Card in the category that they wish to be trained to demonstrator level. Each delegate that wishes to be considered as a Demonstrator should have a reasonable knowledge of good site safety practice, be confident and a good communicator. * Awareness of different types of Mobile Elevating Work Platform (MEWP) • Safe operation of MEWPs and limitations of use • Pre-use checks, inspection and function tests • Defect reporting & handover procedure • Basic operational practice • Log book issue • Course review and close

Read more

PASMA Scaffold Tower Standard Course

12Working At HeightsHealth & Safety
125

Personnel who will be responsible for the assembly, dismantling,alteration, moving and inspecting of mobile access towers.How to safely assemble, dismantle, relocate and alter a mobile accesstower without risk of personal injury to the delegate or others.Legislation, Regulations and Guidance affecting working at height withmobile access towers, PASMA Code of Practice; Product Standards EN1004:2004, assembling, altering and dismantling towers incorporatingcurrent best practice for fall protection, inspection of completed mobileaccess towers and completion of Tower Inspection Records; hazardsaffecting the use of mobile access towers and how to avoid.

Read more

IPAF Operator

Working At HeightsHealth & Safety
POA

Training people in the safe and competent use of Mobile Elevated Work Platforms 3a Scissor Lift and 3b Boom. •Safe operational procedures •Accident prevention •Emergency descent •Testing and inspection •Different categories of MEWPs •Employers and Employees legal responsibilities Upon successfully passing the course a PAL (powered access licence) card, safety guide, log book and certificate will be issued. IPAF PAL cards are recognised internationally

Read more

Abrasive Wheels

General SafetyHealth & Safety
POA

Safety Harness

Working At HeightsHealth & Safety
POA

Working at Height

Working At HeightsHealth & Safety
POA

In House Working at Height training, upon succesful completion of the course delegates will receive an In House Certificate.

Read more

Harness Awareness Training

Working At HeightsHealth & Safety
POA

Basic harness safety training. •How to fit, adjust, wear and inspect a body harness. •Regulations, hazards, standards, storage and rescue provisions. •Safe working loads and limitations. A short written test will take place at the end of the training and an In House certificate produced for basic harness training

Read more

PASMA Tower and In House Steps & Ladders

Working At HeightsHealth & Safety
POA

PASMA Tower training - delegate will receive a PASMA photocard and licence for this upon succesfully passing the course. In House Steps and Ladders training - delegate will receive and In House certificate upon succesfully passing this part of the course.

Read more

PASMA Combined Course

Working At HeightsHealth & Safety
POA

How to safely assemble, dismantle and relocate low level access units and standard mobile access towers without risk of personal injury to the delegate or others. 5 year PASMA certification and licence card will be issued to successful delegates.

Read more

IPAF Scissor

Working At HeightsHealth & Safety
POA

This is for IPAF Scissor 3a only. Succesful delegates will receive a 5 year PAL card and certificate.

Read more

PASMA Working at Height Essentials

Working At HeightsHealth & Safety
POA

This is a half day course. Anyone who is involved in work at height will benefit from this course. It will enable an individual to effectively comply with their duties under the Work at Height Regulations. A course content and notes booklet and a current Code of Practice booklet will be issued to all delegates who attend the course. A PASMA certificate and PhotoCard will be issued to successful delegates who complete the theory and assessment sessions at the level they attend the course which has a five year validity period.

Read more

In House Abrasive Wheels

General SafetyHealth & Safety
POA

This In House course is for anyone that works with Abrasive Wheels. The course will cover;- *Relevant Health & Safety Laws *Regulations Responsibilities of employees and their employers * Safe inspection of the equipment *Awareness and risk reduction * How to operate the equipment safely * The correct way to store equipment * Maintenence of equipment * Correct PPE Delegates will sit a test at the end of the course and successful applicant will receive a certificate.

Read more

In House Manual Handling

General SafetyHealth & Safety
POA

This is a half day course. This course is an introduction to moving and handling activities. Deleagates will gain the relevant knowledge and skills to deal with moving and handling objects safely and reduce the risk of injuries. Introduction to Manual Handling Manual Handling and the Legal Aspects Manual Handling Hazards High-risk Manual Handling Activities Assessing Manual Handling Activities Reducing the Manual Handling Risks Practical Manual Handling Techniques

Read more

In House Steps & Ladders

Working At HeightsHealth & Safety
POA

Our In House Steps & Ladders training is a 1/2 day course and is designed to cover:- • Inspection • Safe Use • Eliminate dangers of incorrect ladder use • Selection of correct ladder type • Ladder and Step defects • Correct Usage Delegates will sit a test paper at the end of the course and awarded with an In House certificate for passing the course.

Read more

IPAF Harness

Working At HeightsHealth & Safety
POA

Harness training to the IPAF standard. Includes: Selection of appropiate Harness Inspection & Maintenance How to fit and use Health & Safety regulations Successful delegates will receive an IPAF certificate valid for 5 years.

Read more

IPAF Operator 3b

Working At HeightsHealth & Safety
POA

IPAF Operator 1b

Working At HeightsHealth & Safety
POA

Training people in the safe and competent use of Mobile Elevated Work Platforms, category 1b. •Safe operational procedures •Accident prevention •Emergency descent •Testing and inspection •Different categories of MEWPs •Employers and Employees legal responsibilities Upon successfully passing the course a PAL (powered access licence) card, safety guide, log book and certificate will be issued. IPAF PAL cards are recognised internationally

Read more

IPAF MEWPS for Managers

Working At HeightsHealth & Safety
POA

About the course Companies that use MEWPs need to know what their management responsibilities are – and what their legal responsibilities are. The course covers what managers need to know about the safe use of MEWPs on site, from planning the job and conducting a risk assessment, to selecting the right equipment and mitigating all possible risks. Under UK health and safety legislation, specifically, the Provision and Use of Work Equipment Regulations 1998 (PUWER) and the Work at Height Regulations 2005, employers must train all employees who plan, supervise and manage work at height and the use of equipment for such work. Who should take this course? Employers, project managers, foremen and supervisors working in a broad range of industries such as construction, facilities management, retail, airports and arboriculture. Anyone who is responsible for planning and overseeing the use of MEWPs on their job site. Qualification This course is about planning, supervising and managing the use of MEWPs, and not about operating equipment. It ends with a written test that candidates must pass. Upon successful completion of the theory test, candidates will receive an IPAF certificate. Those who hold a valid Powered Access Licence for operating equipment can have the MEWPs for Managers (MM) category added to their PAL card.

Read more

CCNSG Safety Passport

General SafetyHealth & Safety
POA

To provide contractors and site personnel with an underpinning knowledge of health & safety to enable them to work on a site more safely with lower risk to themselves and others.

Read more

N403 Vehicle Banksman

NPORSHealth & Safety
POA

Basic Scaffold Inspection

Working At HeightsHealth & Safety
POA

This Scaffold Inspection course provides even the most experienced worker with knowledge on how the job has to be carried out in line with health and safety standards. It is for all supervisors, managers and employees responsible for inspecting and signing off scaffold structures. Course content: • The broad requirements of the regulations, responsibilities and good practice that relates to scaffold use • Technical scaffold terminology & recognition • Types of scaffold
 • Load limitations • Ties • Working platforms
 • Practical inspection
 • Recording results • Potential site hazards in scaffolds and know how to remove or mitigate them to a level that is acceptable • Safety of the Public & site accident causes & prevention • Site Assessment • Unsafe Scaffolding Procedures

Read more

CCNSG 1 day Refresher course

General SafetyHealth & Safety
POA

The CCNSG Renewal Course is designed as a one day refresher course for those who have already passed the CCNSG National Course. This has to be taken within three months of the Safety passport expiry date. If it is not taken within the specified time then the two day CCNSG National Course will have to be retaken. The CCNSG Renewal Course covers the following objectives: The Impact of an Accident The Importance of Safe Behaviour Legal Framework POWRA PTW Good Practice

Read more

IPAF Push Around Vertical Training (PAV)

Working At HeightsHealth & Safety
POA

Emergency First Aid at Work

8First AidHealth & Safety
99

In House Emergency First Aid At Work has both theory and practical sessions. It is designed to suit low risk businesses. This course is run in accordance as per Health & Safety (First Aid) Regulations 1981 and is run for one day.

Read more

Abrasive Wheels

General SafetyHealth & Safety
POA

Category Filter

Opening hours

  • Mon:closed
  • Tue:closed
  • Wed:closed
  • Thu:closed
  • Fri:closed
  • Sat:closed
  • Sun:closed

About Us


Write to us

Harris Safety Training Services

1 Bucklewood
Off Tintern Avenue
Worcester
West Midlands
wr3 8ej

Get Directions